- Home
- How it works
How it works
From your file to a fitted-out trolley.
You describe the project online. Every insert is calculated, checked and then reviewed before the quote. Nothing is machined without your approved proof.
The five steps
What happens, and when.
- 01
Describe the project
Stations, drawers or cases, then your parts: 3D file, photo on the A4 template or dimensions.
online, no account - 02
Review and quote
Every insert is checked. You receive dimensioned drawings and a quote in your customer area.
2 working days - 03
Acceptance
You accept the quote online: name, consent box, date and time.
online - 04
Proof
You approve the final drawing of each insert before machining.
at your own pace - 05
Production and shipping
Machining, inspection, tracked shipping.
5 working days
Step 1
Your project, organised like your workshop.
The configurator follows the real structure of your stations. A draft is saved at every step: you can start without an account.
- Level 1
Project
5S, SMED, case, packaging or mixed; site and deadline
- Level 2
Station or machine
“Press 3”, “Maintenance bench”
- Level 3
Container
Tool trolley drawer, case, crate, wall panel or free dimensions
- Level 4
Insert
Thickness, foam, base colour, engraving, quantity
- Level 5
Parts
3D file, photo on the A4 template or dimensions; label or SMED step
Your parts
Three ways to describe them.
You can mix them in the same project: a STEP for a machined part, a photo for hand tools.
3D file
STL or STEP of each part. The pocket follows its exact shape, with a stable resting position worked out automatically.
Photo on the A4 template
Parts laid flat on the template printed at 100%, photographed straight from above. Give their height.
Entered dimensions
For a simple shape: rectangle, cylinder or slot, with length, width and height.
Step 2
What we check before quoting.
Our software calculates the pocket of each part and flags anything wrong: part too tall, wall too thin, unreadable file. Each insert is then reviewed by a person before the quote is sent.
- 1.5 mm clearance around each part
- Wall of at least 8 mm between two pockets and at the edge
- Depth always less than the foam thickness
- A notch to pick up each part with the fingertips
- Tolerances: ±1 mm on pockets, ±2 mm on the outside
Frequently asked questions
The practical details.
Which files can I send?
STL or STEP for 3D parts, DXF or a dimensioned PDF for an outline. Without a 3D file, a photo of the parts laid flat on our printed A4 template is enough, together with their height.
How do I take the right photo?
Print the A4 template at 100%, lay your parts flat without covering the corner marks, then take the photo straight from above with all four corners visible. Give the height of the thickest parts.
What is the proof (BAT)?
The final drawing of each insert, which you approve in your customer area. Nothing is machined before this approval.
How accurate are the inserts?
Pockets are machined to ±1 mm and the outside of the insert to ±2 mm. A 1.5 mm clearance around each part lets you put it in and take it out without forcing. You check every dimension on the drawing before production.
What are the lead times?
Drawings and quote within 2 working days for a complete project. Production in 5 working days after proof approval, then tracked shipping.
Are my files kept confidential?
They are only used for your project, stored in the European Union and never published or shared.
Describe your first station. The rest follows.
Start without an account: your project is saved as a draft at every step.
- Standard dimensioned drawings for every insert
- Quote reviewed by hand, never sent automatically
- Nothing is machined without your approved proof